Figure 6-45 Windows Xp - Driver Location - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
Windows XP
In order to install any software you must have Administrator's access privileges.
Proceed as follows:
1. Connect the HiPath 1100 system to the computer
2. The Found New Hardware Wizard window appears so that new drivers can be installed.
Choose "Install from a list or specific location (Advanced)." Click "Next" to proceed.
Figure 6-45 Windows XP - Driver location
3. A second window opens. Select "Search for the best CAPI in these locations" then select
"Include this location in the search". Under Browse, select the directory where the
decompressed driver is stored. Drivers can be found on the CD, in the folder
\Software\USB Drivers. The drive is decompressed in C:\Temp (Default). If Admin is
selected, use C:\Temp\optiPoint_Adm_Drivers_039 directory. If Admin + CAPI is selected,
use C\Temp\optiPoint_AdmCAPI_ Drivers_039. Select a folder and click "Next";
6-45
A31003-K1160-S100-03-7620
Service Manual