Siemens HiPath 1100 Service Manual page 290

Configuring the system specifically for the client
Comments about the System's Programming Codes
7.2.7 Updating the Software
SW Information (001)
This displays information about the system's software. To view this information use a system
telephone with a display.
The switch must be connected to a PC with CommServer and APS Version Verifier running.
Local SW Update (060)
This feature initiates the download of the last software version released for the PC and then
downloads the update for the exchange. For this feature to work the system must be connected
to a PC with CommServer and APS Version Verifier running.
Activating a SW Update (055)
This feature allows you to update the system's software automatically at a scheduled date.
Day for Update (054)
This setting specifies a day for starting the data transfer (upload process).
Time for Software Update (058)
This setting specifies the time of day for starting the data transfer on the specified day.
External Number for Updating the Software (056)
This setting specifies a number to be used by the system to update the software.
Frequency for SW Update (057)
This setting specifies regular intervals in months for transferring data.
During a transfer the telephone operates as usual.
The default setting specifies updates to be done in a monthly basis.
Uploading the SW Update (059)
This setting specifies the moment data downloaded will be uploaded to the system's memory.
While this upload is in progress (lasting approximately 3 minutes), the telephone remains out
of service.
The default setting specifies for data to be transferred at 00:00 hours.
A31003-K1160-S100-03-7620
7-52
Service Manual