Samsung DCS Programming Manual page 93

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
For iDCS100 systems
ACTION
1. Open programming and select 212
Display shows first sensor
2. Dial sensor number (e.g., 352)
OR
Press VOLUME keys to scroll through sensor
numbers and press RIGHT soft key to advance
cursor
3. Press RIGHT soft key to move cursor
Enter destination for ring plan 1 (e.g., 205)
OR
Press VOLUME key to make selection and press
RIGHT soft key to advance cursor
4. Enter destination for ring plan 2 (e.g., 205)
OR
Press VOLUME key to make selection and press
RIGHT soft key to advance cursor
Repeat this step for each ring plan (1–6) required
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
All sensors ring 500 for all ring plans
MMC 213 Alarm Message
MMC 212 (Page 2 of 2)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
[352]ALARM RING
1:500 2:500
[352]ALARM RING
1:500 2:500
[352]ALARM RING
1:205 2:500
[352]ALARM RING
1:205 2:205