Samsung DCS Programming Manual page 91

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
For iDCS & OS500 systems
ACTION
1. Open programming and select 211
Display shows first door phone
(If there is no door phone interface module, you
see "DOOR NOT EXIST")
2. Dial door phone number (e.g., 210)
OR
Press VOLUME keys to scroll through door phone
numbers and use the RIGHT soft key to move
cursor
OR
Press ANS/RLS to select all door phones
3. Press RIGHT soft key to move cursor
Enter ring plan 1 selection (e.g. 301)
OR
Press VOLUME keys to make selection and
press RIGHT soft key
4. Enter ring plan 2 selection (e.g. 302)
OR
Press VOLUME keys to make selection and
press RIGHT soft key
Repeat this step for each ring plan (1–6) required
5. Press RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3
OR
Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
Station group 500 (all ring plans)
None
MMC 211 (Page 2 of 2)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
[201] DOOR RING
1:500 2:500
[210] DOOR RING
1:500 2:500
[210] DOOR RING
1:301 2:500
[210] DOOR RING
1:301 2:302