Samsung DCS Programming Manual page 399

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 853
FOR: iDCS100
Purpose: Puts stations, trunks and common resource equipment in a 'maintenance
busy' condition. This can be used to isolate suspected intermittent problem equipment. A
station placed in maintenance busy will behave like a station in DND when called. The
station's display and any calling station's display (if equipped) will show "MADE BUSY".
Stations receiving DDI or E&M type calls will receive a DND/No more calls tone. The sta-
tion display will still function with station name, time and date. When a busy station is
called, it will function like a locked-out station. Trunks made busy cannot originate calls.
Ringdown type trunks will still ring the programmed destination. Common resource
equipment such as DSPs and CID DSPs, and miscellaneous equipment such as page
ports, AA ports or voice mail card ports, can also be placed in a maintenance busy state.
MAINTENANCE BUSY OPTIONS
0. TRK = Trunks
1. STN = Stations
2. PAGE = Page Ports
3. AA = Auto Attendant card ports
4. DTMFR = DSP receiving DTMF
5. CID = DSP receiving CID
6. R2MFC = DSP receiving R2MFC
7. CONF = DSP for conference
= MGI Port
8. MGI
Selectable states are 0:Idle and 1:Busy. (Display will show IDLE if an option—e.g. CID
DSP—is not available.)
ACTION
1. Open programming and select 853
Display shows
2. Press VOLUME keys to select option (e.g. STN)
and press RIGHT soft key
3. Press VOLUME keys to select station number
(e.g. 211) and press RIGHT soft key
4. Dial 0 or 1 for IDLE/BUSY (e.g. BUSY)
OR
Press VOLUME keys to select and press RIGHT
soft key
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
iDCS500 OS500
All IDLE
MMC 851 Alarm Report
MMC 852 Assign System Alarms
MMC 853 (Page 1 of 1)
MAINTENANCE BUSY
DISPLAY
MAINTENANCE BUSY
TRK :NONE
MAINTENANCE BUSY
STN :NONE
MAINTENANCE BUSY
STN :211
MAINTENANCE BUSY
STN :211
MMC PROGRAMS
FEBRUARY 2004
IDLE
BUSY