Samsung DCS Programming Manual page 235

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 701
FOR:
Purpose: Creates a new class of service (COS).
Note:
1. If you want to make a copy of an existing COS and change some options, use
2. If the 'unsupervised conference' feature is to be allowed in a COS, a CONF key must be pro-
grammed on keysets to allow users to re-enter a conference call.
TOLL LEVEL OPTIONS
DIAL DIGIT
0
1
2
3
4
5
6
7
(Note: The programming procedure and COS feature lists for iDCS and OS500 systems
come after the programming procedure and COS feature lists for all other systems,
shown next.)
For all systems except iDCS & OS500
ACTION
1. Open programming and select 701
Display shows
2. Dial COS number (e.g., 06)
OR
Press VOLUME keys to select COS and press
RIGHT soft key to move cursor
3. Dial toll level (e.g. 2)
OR
Press VOLUME keys to select option
4. Press RIGHT soft key to advance to COS options
Use tables and data below to set options
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
ASSIGN COS CONTENTS
ALL SYSTEMS
TOLL LEVEL
A
B
C
D
E
F
G
H
MMC 701 (Page 1 of 9)
MMC PROGRAMS
FEBRUARY 2004
MMC
DISPLAY
COS CONTENTS(01)
TOLL LEVEL:A
COS CONTENTS(06)
TOLL LEVEL:A
COS CONTENTS(06)
TOLL LEVEL:C
COS CONTENTS(06)
000:AA CALER:YES
700.