Program 35 Overview; Led 19: Busy Station Transfer (Bst), Led 20 / Busy Station Ringing (Bsr) - Toshiba Strata DK40 Programming Manual

Program 35 Station Class of Service
Busy Station Transfer
Busy Station Ringing
Automatic Hold
DKT 2000 Telephone Continuous DTMF
Tones OFF
No CF/NA Handsfree
Not used
LCD Personal Message (10~19)
Allowed
Message Waiting (RCV)
LCD Type/32-ON/12-OFF
LCD Display

Program 35 Overview

LED 19: Busy Station Transfer (BST), LED 20 / Busy Station
Ringing (BSR)
BST and BSR operate together to ensure that a busy digital or electronic telephone station
always receives transferred line calls along with LED and tone indications. The station or
Voice Mail (VM)/auto attendant device that transfers the call must be programmed with BST
(LED 20 ON) and the station port that receives it must have BSR (LED 19 ON).
When a busy station with BSR receives a transferred call from a station or VM/auto attendant
with BST, there will be a muted repetitive tone (1 second ON, 3 seconds OFF) at the busy
station and the intercom LED will flash at the ringing rate until the station transferring the
call hangs up. When it does hang up, the call will then camp-on to the busy station. The busy
station will be alerted of the camp-on by a camp-on tone (five quick tone bursts), the
exchange line LED will flash at the exclusive hold rate, and a message ("CAMP-ON X", X =
the line number) will appear on the LCD (if equipped). Among other applications, one in
which a VM/auto attendant device that transfers calls to a typically busy answering position
station will benefit from this feature-some auto attendant devices cannot transfer a call to a
busy station if BST and BSR are not activated.
Strata DK40 Programming Manual Spring 1999
Feature
0 0 0 0
1 1 1 1
LED 5 6 7 8
20
19
18
17
16
15~08
07
06
05
04
03
02
01
System & Station
Port
0 0 0 0 0 0
1 2 2 2 2 2
9 0 1 2 3 4
0 0 0
2 2 2
5 6 7
3-77