Call Characteristics; Introduction; Call Macro - Bosch Praesideo 3.5 Installation And User Instructions Manual

Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
46

Call characteristics

46. 1

Introduction

Using the Call characteristics pages, call macros can be
defined (see section 43.2).
Call characteristics
figure 46. 1 : Call characteristics pages

46.2 Call macro

46.2.1 Introduction
On the Call macro page, call macros can be defined. Call
macros are used to make calls.
46.2.2 Create a call macro
Proceed as follows to create a new call macro:
1 Go to Configure > Call characteristics > Call macro. A
screen similar to the one in figure 46.2 appears in the
main frame of the web interface.
figure 46.2: Add call macro, step 1
2 Click the Add button to add a new call macro. A
screen similar to the one in figure 46.3 appears in the
main frame of the web interface.
Bosch Security Systems | 2011-02
Call macro
figure 46.3: Add call macro, step 2
3 Enter the name of the new call macro in the Name
field (see figure 46.4 for an example). It may consist
of up to 16 characters.
figure 46.4: Add call macro, step 3
4 Click the OK button to add the call macro to the list
of call macros in the system. A screen similar to the
one in figure 46.5 appears in the main frame of the
web interface.
en | 381