Table of Contents
Advertisement
2011-02 | Installation and User Instructions | 5 | Call Stations
16.2.2 Bottom view
The bottom of the call station keypad (see figure 16.3)
contains the following:
4 Keypad connector - A connector to connect the
keypad to the next keypad.
5 ID selector - A selector to identify the call station
keypad to the (remote) call station (see section 16.3).
6 Keypad connector - A connector to connect the
keypad to the previous keypad or the (remote) call
station.
4
figure 16.3: Bottom view
Bosch Security Systems | 2011-02
16.3
Configuration
It is possible to connect:
•
Up to 16 call station keypads for pre-configured
actions (LBB4432/00 or LBB4434/00) to a (remote)
call station.
•
Up to 15 call station keypads for pre-configured
actions (LBB4432/00 or LBB4434/00) and one
numeric keypad (PRS-CSNKP) to a (remote) call
station.
For a correct communication between the call station
and its keypads, the correct ID must be assigned to each
keypad for pre-configured actions using the ID selector
(see figure 16.3, no. 5 and figure 16.4).
The ID of a keypad for pre-configured actions depends
on its position in the array of keypads. The first keypad
5
for pre-configured actions has ID 0, the next 1, and so
on up to F for the sixteenth keypad for pre-configured
6
actions.
figure 16.4: ID selector
E
2
C
4
A
6
8
en | 209
Advertisement
Table of Contents
