Table of Contents
Advertisement
2011-02 | Installation and User Instructions | 5 | Call Stations
18.3
Installation
The call station kit contains six holes for installation
purposes (see figure 18.12).
5
figure 18. 1 2: Installation
The kit is delivered together with Tyco AMP pin
headers and Tyco AMP 1-141708-1 shrink-contacts (see
figure 18.13) to facilitate the connection of wires to the
PCB. These pin headers are suitable for wires with a
cross-section from 0.2 to 0.56 mm
solder the wires to the pin headers.
Note
If the call station kit is installed in a vibrating
surrounding (e.g. a ship), glue the pin header to
the PCB.
figure 18. 1 3: Tyco AMP 1-141708-1 shrink-contact
Bosch Security Systems | 2011-02
3,2 +/- 0.1
(6x)
108
118 +/- 0.2
2
. It is possible to
To connect the wires to the shrink-contacts, use one of
the following pliers:
•
Tyco AMP 169111-1 pliers (see figure 18.14)
•
Tyco AMP Modu 4 169481-1 pliers (see figure 18.15)
figure 18. 1 4: Tyco AMP 169111-1 pliers
figure 18. 1 5: Tyco AMP Modu 4 169481-1 pliers
en | 224
169111-1
MODU 4
16 9 4 81 - 1
Advertisement
Table of Contents
