Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
43.8 Multi Channel Interface
43.8.1 Procedure
This section describes the configuration of a multi
channel interface. The basic amplifiers, which are
connected to the multi channel interface, are not
configured directly by the configuration web pages, but
via the multi channel interface.
Configure the multi channel interface and connected
basic amplifiers as follows:
1 Go to Configure > Equipment configuration > Multi ch
interface. A screen similar to the one in figure 43.39
appears in the main frame of the web interface.
figure 43.39: Configure multi channel interface, step 1
2 Click the name of the multi channel interface to be
configured. A screen similar to the one in figure
43.40 appears in the main frame of the web interface
figure 43.40: Configure multi channel interface, step 2
3 Open the Audio Outputs category to configure the 14
main outputs of the multi channel interface. (See
section 43.8.2.)
4 Open the Spare Outputs category to configure the 2
spare outputs of the multi channel interface. (See
section).
Bosch Security Systems | 2011-02
5 Open the Control Inputs category to configure the 32
control inputs of the multi channel interface. (See
section 43.8.4.
6 Open Control Outputs category to configure the 16
control outputs of the multi channel interface. (See
section 43.8.5.
7 Submit the changes. Note that the changes are not
permanent until the configuration is saved (see
section 40.4.4 and section 40.4.5).
en | 363
Advertisement
Table of Contents
