Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
43.3 Power amplifier
43.3.1 Procedure
Proceed as follows to configure a power amplifier:
1 Go to Configure > Equipment configuration > Power
amplifier. A screen similar to the one in figure 43.9
appears in the main frame of the web interface.
figure 43.9: Configure power amplifier, step 1
2 Click the name of the power amplifier that must be
configured. A screen similar the one in figure 43.10
appears in the main frame of the web interface.
figure 43. 1 0: Configure power amplifier, step 2
3 Open the General category to configure the general
settings of the power amplifier (see section 43.3.2).
4 Open the Audio inputs category to configure the
audio inputs of the power amplifier
(see section 43.3.3).
5 Open the Audio outputs category to configure the
audio outputs of the power amplifier
(see section 43.3.4).
6 Open the Control inputs category to configure the
control inputs of the power amplifier
(see section 43.3.6).
Bosch Security Systems | 2011-02
7 Open the Control outputs category to configure the
control outputs of the power amplifier
(see section 43.3.7).
8 Submit the changes. Note that the changes are not
permanent until the configuration is saved
(see section 40.4.4 and section 40.4.5).
en | 346
Advertisement
Table of Contents
