Setting The Date And Time - Sanyo VSP-8000 Instruction Manual

SETTING THE DATE AND TIME

Example: Setting the date to May 10, 2000 and the time to 9:20:00.
1
Press the MENU button.
Then press the + (or – ) button until " CLOCK SET" is displayed and
press the ENTER button.
•
The date and time setting screen appears.
2
Set the year, month, day, hours, minutes, and seconds with the
numeric keypad.
•
For the year 2000, press [0] [0]. The cursor will move to the month.
•
For single digit numbers, first enter a zero.
Ex.: To enter the month of May, press [0] [5].
•
The clock is a 24-hour clock.
Ex.: To enter 9:00 p.m. (21:00), press [2] [1].
For mistakes: Either press the joystick lever (J or q) to move the cursor, or
press the CLEAR button. Then recheck and enter the correct
setting.
3
Press the ENTER button.
•
The settings are stored and the "CLOCK SET" screen reappears.
Press the MENU button to return to the initial screen.
Note: To abort the setting, press the MENU button. When pressed, the setting will
be cancelled and you will return to the initial screen.
MENU
8
- +
Y : - / M : - - / D : - -
-
- - : - - : 0 0
ENTER
1 2 3
Year Month
4 5 6
Y : 0 0 / M : 0 5 / D : 1 0
7 8 9
0
2 1 : 2 0 : 0 0
Hour Minute Second
ENTER
Day