Multiplexer Operation; [A] Operation Using The Command Buttons - Sanyo VSP-8000 Instruction Manual

MULTIPLEXER OPERATION

The VSP-8000 enables two methods of multiplexer operation. One is performing direct operation using the command buttons on the
VSP-8000 [A] and the other is by using the call-up commands to bring up commands to the menu screen [B]. Some multiplexers are
equipped with a matrix switching function (for spot monitor screen setting), and some are not. The system controller automatically
detects which type of multiplexer is connected.

[A] Operation using the command buttons

Use the procedure outlined below to operate the multiplexers.
S A N Y O C o n t r o l l e r
1 5 : 3 0 : 3 0
Operating procedure
1. Press the INDIVIDUAL button.
2. Press the MODE button to change the displayed device to
"MX".
3. Enter the address with the numeric keypad.
4. Press the ENTER button to check the address status.
•
The operating status of the multiplexer appears in the
menu screen. (Refer to Checking the address.)
5. Press the desired command buttons located in the
MULTIPLEXER section of your VSP-8000.
•
For an explanation of the multiplexer command buttons,
refer to the Command button operation list on page 21.
INDIVIDUAL
MODE
1 2 3
4 5 6
7 8 9
0
ENTER
MULTI QUAD PLUS
SEQ
CAM
STILL SEQ
MPX
MON2
LIVE VCR
SPOT
EXIT
FULL NEXT
BACK
MULTIPLEXER
CLEAR
CLEAR
CLEAR
1 Device display
V R : - -
-
2 Device selection
M X : - -
-
3 Address entry
M X : - - 1
Device title (
2 N D F L O O R
4 Address check
M X : 0 0 1 L : M U L T I
Refer to "Checking the Address"
5 Operation
(Example)
execution
M X : 0 0 1
M X : 0 0 1 < S E Q >
QUAD
M X : 0 0 1
MULTI
LIVE
M X : 0 0 1
M X : - -
-
Checking the address
When the address is checked in step 4,
the operating status of the multiplexer
appears in the menu screen.
Status
L: MULTI
V: MULTI
L: QUAD
L: QUAD: S
L: PLUS 16
L: PLUS: S
L: FULL: S
L: FULL: 16
1
M2SET: 16*
1
M2SET: S*
2
SPOT2:01*
2
SPOT2:S*
MENU
SERIES
If a "V" appears instead of an "L", the mode is video or digital video
recorder playback mode.
*1: When matrix switching function is not available
*2: When matrix switching function is available
20
Multiplexer
M X : - -
-
Timelapse VCR
V R : - -
-
Camera
C M : - -
-
D R : - - Digital video
-
recorder
P13)
CLEAR
< Q U A D >
< M U L T I >
M X : 0 0 1 < L I V E >
Operating condition
Live picture mode, multi-screen (9-screen/16-screen
full screen)
Video playback mode, multi-screen
(9-screen/16-screen full screen)
Live picture mode, quad-screen
Live picture mode, quad-screen, sequential display
Live picture mode, plus screen, 16-screen full screen
Live picture mode, plus screen, sequential display
Live picture mode, full screen sequential display
Live picture mode, 16-channel full screen
16-channel full screen for monitor 2
Sequential display for monitor 2
1-channel full screen for spot monitor 2
Sequential display for spot monitor 2
Menu screen
The multiplexer is digital and if it is connected in series,
the main monitor display is activated by the LIVE
button on the device to be displayed.
Operating status
M X : 0 0 1 L : M U L T I