General Information; Operator's Manual; Machine Hydraulic Control - Toro ProPass 200 Service Manual

General Information

Operator's Manual

The Operator's Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your ProPass machine. Refer to the Opera-
tor's Manual for additional information when servicing
the machine.

Machine Hydraulic Control

ProPass 200 machines use either standard hydraulic
controls or electronic hydraulic controls to allow the op-
erator to change machine settings.
Machines with standard hydraulic controls include
manual hydraulic controls on the front of the ProPass
hopper to adjust hydraulic flow to the floor and rear op-
tion (twin spinner or conveyor) motors (Fig. 1). A
pendant electrical control allows the operator to ener-
gize the floor and rear option from the operator position
of the tow vehicle.
Machines with electronic hydraulic controls include a
wireless remote to electrically adjust hydraulic flow to
the floor and rear option (twin spinner or conveyor) mo-
tors (Fig. 2). The remote allows initial adjustment of the
floor and spinner motors as well as making adjustments
possible while the machine is operating. An E--Stop but-
ton on the machine disables the electrical system to pre-
vent unexpected machine operation.
ProPass 200
1
1. Floor control
2. Rear option control
2
1. Wireless remote
2. E- -Stop button
Page 4 - - 3
2
3
Figure 1
3. Pendant harness
1
3
4
Figure 2
3. Power lead harness
4. Optional power pack
Electrical System