Toro ProPass 200 Service Manual page 37

Problem
Floor does not function (machines with standard
hydraulics).
Floor does not function (machines with electronic
hydraulics).
NOTE: Check wireless remote LCD display and base
unit LED's for help in troubleshooting.
ProPass 200
Possible Causes
Floor control valve setting is not adjusted properly.
Floor solenoid valve is faulty.
An electrical problem exists (see Chapter 4 -- Electrical
System).
Hydraulic floor motor is faulty.
Wireless remote settings are incorrect.
Control manifold proportional solenoid valve (SP1) is
faulty.
An electrical problem exists (see Chapter 4 -- Electrical
System).
Hydraulic floor motor is faulty.
Page 3 - - 23 Hydraulic System