Call Service - Panasonic KX-TVP150 User Manual

:' :
-.
3.3.2 Call Service
What the Call Service
does:
Day Service (See 3.3.2.1)
Class of Service (See 3.3.2.2)
Port Assignment (See 3.3.2.3)
Automated Attendant Parameters (See 3.3.2.4)
3.3.2.1 Day Service
The Day Service is a timer function that plays the appro-
priate greetings at the correct time of day. If the company
greeting mode is set to the automatic mode, the timer can
be set to play a certain greeting from a certain time to
another. For example, 'Hello, Panasonic Voice Processing
System' might be played from 6:OOAM in the morning to
5:00PM, and 'Good Evening, this is . ..' from 5:OOPM to
6:OOAM.
3.3.2.2 Class of Service
All subscriber's are classified into eight groups, each
known as a Class of Service. The call service authorization
is the assignment call service (Incoming/Outgoing calling)
to each class of service and port. All members in a class of
service are allowed to use the same call service of a partic-
ular port. For example, if the first class of service is autho-
rized to use only the incoming call service of the second
port, the mailbox belonging to the subscriber who is
assigned to the class of service can be accessed by the caller
through the port. He cannot, however, make any outgoing
calls through the same port.
Once this authorization is established, each port can be
used exclusively for a single class of service. When a Voice
Processing System is shared by more than one division of
a company, each line connected to the VPS can be assigned
to each division.
Incoming Call
Authorization
The decision is made by the System, Administrator as to
whether to allow each class of service to use the incoming
call service at each port.
M-3-12
System Administrator
Manager's Guide