Table of Contents
Advertisement
2.2.5
Starting the System
Note:
If there is any hardware failure on the CO card or the DSP
card, the system will identify the defective boards. If there
is no normal pair of ports and DSP, the system cannot
provide any service to the caller. Refer to chapter 7 which
is the Troubleshooting Guide in this manual.
To enter system administration, the System Administrator
must press the [RETURN] key and enter his password.
ENTER THE ADMINISTRATOR
PASS WORD :=
Note:
There is no factory setting for the password of the System
Administrator.
For further details, see "3.3.5 Utility
Command-Set Password" and "3.4 Keyboard Operations
3.4.6.3
PASS"
When the System Administrator starts operations, the sys-
tem asks him or her for the terminal type. By pressing [l],
he or she can set up system parameters through the conver-
sational menu driven program.
Please Select YOUY Terminal Type.
I. ASCII TERMINAL
2. VT220 COMPATIBLE
TERMINAL
ENTER THE NUMBER
:=
The system set up method is provided in Chapter 3 System
Administrator's Guide in this Manager's Guide.
Manager 's Guide
Configuration
& Installation
M-2-23
Advertisement
Chapters
Table of Contents
