NEC Express5800 series User Manual page 78

4-12 Configuring Your Server
PCI Configuration
The following screen appears if you select "PCI Configuration" on the Advanced menu. Selecting
an item on the screen allows the proper submenu to appear.
Option
PCI Slot 1 Option
ROM
– Embedded SCSI
Option
SCSI Controller
Option ROM Scan
– Embedded NIC
Parameter
[Enabled]
Disabled
Parameter
[Enabled]
Disabled
[Enabled]
Disabled
Description
Displays the submenu used to enable
or disable the BIOS installed in the
device (board) connected to the PCI
bus. When the graphics accelerator
board is installed or the disk array
controller or SCSI controller boards to
be installed are connected to the hard
disk drive in which the OS is installed,
set this item to "Enabled." When the
LAN controller board with installation
of the option ROM BIOS is used but
the board does not provide network
booting, set this item to "Disabled."
Description
Indicates whether the on-board SCSI
controller is enabled or disabled.
Displays the submenu that indicates
whether the expansion of BIOS of
on-board SCSI controller is enabled or
disabled.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set