NEC Express5800 series User Manual page 193

4.
Press S when the following message appears:
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an
adapter.
Currently, Setup will load support for the following mass storage devices.
Select [Other] and press Enter.
5.
Insert "N8460-001 Drive FD" into the floppy disk drive and press Enter.
Please insert the disk labeled
manufacturer-supplied hardware support disk
* Press ENTER when ready.
6.
Select "USB Blade" and press Enter.
7.
Press S when the following message appears:
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an
adapter.
Currently, Setup will load support for the following mass storage devices.
Select [Other] and press Enter.
8.
Insert Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive and press Enter.
Please insert the disk labeled
manufacturer-supplied hardware support disk
* Press ENTER when ready.
9.
Select the [Adaptec Ultra320 SCSI Cards (Win2000)] and press Enter.
It then returns to the 5
10.
If the onboard Adaptec HostRAID controller is used, select [Adaptec HostRAID U320
Driver Ver 1.02 For Windows 2000/XP/2003] in the list and press Enter.
11.
Press R to select the recovery option.
12.
Select the keyboard.
13.
If requested, press R to select the system recovery procedure.
into Drive A:
into Drive A:
th
step screen.
Troubleshooting 8-21