Network Pin Code Setting; Date And Time Setting - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Network PIN code setting

This page is to set the network PIN code to restrict the access from an unauthorized
person through the network.
Enter a 4-digit numeric number as the network PIN code onto the text box and click
Set button.
The Network Unit begins restarting and it takes about 20 seconds. Close (Quit) the
web browser and access to the login page again in 20 seconds. This is to perform the
login authentication firmly.
The default network PIN code [0000] means no network PIN code is set.
When you connect the projection monitor with this product to the network, it is recommend-
✐
ed to set a new network PIN code. Only a four-digit numeric number is valid for the network
PIN code.
If you forget the network PIN code to the projection monitor, you can set again by selecting
✐
"Network PIN code" sub menu from "Network setting" menu on the projection monitor. For
further information, please see item "Network PIN code setting" (☞p. 20).

Date and time setting

Auto setting
Click AUTO button on the page, the time which is set on your computer is set to
the Network Unit.
Note:
Confirm that your computer has a correct clock time before performing the auto time setting.
Manual setting
Click item Date or Time and enter date or time on the input box with adequate for-
mat.
Dates are in year/month/day format.
ex. 2004/12/08
Times are in 24-hour:minute format.
ex. 14:18
Initial settings
29
PJ-NET ORGANIZER
OWNER'S MANUAL