Network Video Server (Wired Lan) Settings; 1 Installation Of Plug-In Software To The - Sanyo VSP-SV2000P Instruction Manual

Network Video Server (Wired LAN) Settings

In order to use the network video server, you must make the following settings in the order given.
1
Installation of Plug-in Software to the
Computer (p. 10)
Install the contents of the supplied setup
CD-ROM to the computer.
Note: The same setup CD-ROM is
supplied with both the network
camera and the network video
server. You can use either CD-ROM
to carry out the installation.
2
Wired LAN Settings (p. 13)
Connect an Ethernet cable between the
network video server and the computer and
then make the required initial settings such
as the computer IP address, user name,
password and language.
When these settings are completed, the
initial network video server screen will be
displayed. This section gives descriptions of
the various parts of the initial screen for you
to refer to.
3
Network Connection Settings (p. 18)
This screen lets you carry out operations
such as setting access levels
(Administrator, Operator or User) and
changing passwords.
English
– 9 –
Computer