Sanyo PJ-Net Organizer POA-PN30 Owner's Manual page 46

Chapter 4 Controlling the Projection Monitor
46
Item Description
Power
management......Sets into the selected power management mode
(OFF , Ready or Shut down) if the input signal is
interrupted and no control key is pressed for the
specified period of time.
*The specified time can be set 1 to 30 min.
Lamp control......Selects lamp control mode. (Normal, Eco1, Eco2,
Auto)
Lamp time..........Displays the lamp use time of the lamp. Reset the
lamp time after lamp replacement.
Item Description
Sets the fan control speed. (Normal, Max)
Fan speed control......
Status ...........Indicates the current fan mode.
Factory default Sets all of the projection monitor control items to
....
the factory default setting except the following
items.
Lamp time, PJ time, Network PIN code, Network
setting
* This function is not effective for the settings of
the network unit, Network address settings,
e-mail settings, etc.
Freeze................Sets the image to freeze mode.(ON, OFF)