Sanyo PJ-Net Organizer POA-PN30 Owner's Manual page 51

Notes on timer setting
✐ Up to 10 timer events can be registered. Timer events always operate according to the next
valid event depending on the projection monitor's power status. In the example below, event
3 turns on the projection monitor so next event 4 (also turning on projection monitor) will not
be effective because the projection monitor is already turned on. Similarly, when the projec-
tion monitor is turned off by event 5, event 6 OFF will not be effective in turning it off again.
But these secondary events (event 4 and event 6) will become effective if a person turns off
the projection monitor (after event 3 and before event 4) or turns on the projection monitor
(after event 5 and before event 6).
Projector Power
Event 1
Event 2
Event 3
Event 4
Event 5
Event 6
✐ When the timer events are set at the same time, the last event set will override the previous
events. For example, if there is an event like "ON at 8:00 everyday" and then new event is set
like "OFF at 8:00 everyday", only the last setting event is effective.
✐ The timer operates by using the clock function provided in this product. Before setting the
timer, please confirm that the current date and time are set correctly. Timer and clock func-
tions are functioning using a lithium battery provided in this product. When the battery runs
down, the clock and timer functions will not operate correctly. Consult your local dealer for the
replacement of battery. The replacement must be carried out by a qualified service personnel.
ON
ON
OFF
Time
Invalid event Invalid event
ON
ON
ON
OFF
OFF
Timer setting
51
PJ-NET ORGANIZER
OWNER'S MANUAL