Pc Adjustment - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Chapter 4 Controlling the Projection Monitor
Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting
44

PC adjustment

This function is to adjust the signal from the computer con-
nected to the projection monitor to obtain the proper picture
image on the screen.
Item Description
Current mode......Displays the mode of current selected signal. (VGA,
SVGA, XGA. SXGA, UXGA, WXGA...)
Auto PC adj. ......Performs automatic adjustment.
Fine sync. ..........Performs Fine Sync adjustment.
Total dots ...........Adjust the number of total dots in the horizontal
period.
Clamp
Phase ...........Adjusts the phase of the clamp
Display area
Horizontal ........Adjusts the image area horizontally.
Vertical ................Adjusts the image area vertically.
Item Description
Position
Horizontal ......Adjusts the horizontal position of the screen.
Vertical...........Adjusts the vertical position of the screen.
Reset .................Rests the PC adjustments to the previous levels.
Mode Store ........Stores the PC adjustment values. Select a mode
no. [Mode1 - Mode5] from the pull-down menu.
Mode Free .........Clear the PC adjustment values. Select a mode
no. [Mode1 - Mode5] from the pull-down menu.
✐ The adjustment values of Mode1 to Mode5 can be stored into
the projection monitor's memory.