Power Control And Status Check - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Chapter 4 Controlling the Projection Monitor
Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting
Item
PJ status
Power ................... Displays the status of the lamp. (ON, OFF , On starting up, On cooling down)
Status * ................ Displays the status of the projection monitor's power. (Refer to next page.)
1
Power control ........ Controls the projection monitor power by clicking the "ON" or "Standby" button.
PJ temp.
Inside temp. A ..... Displays the temperature around the intake vent of the projection monitor. (Sensor A)
Inside temp. B ..... Displays the internal temperature of the projection monitor. (Sensor B)
....... The warning icon will appear if the temperature exceeds a specified value. Check
38

Power control and status check

Click Power & Status on the main menu. The control page
will be displayed.
By clicking ON or Standby button on the page, the power of
the projection monitor can be controlled.
Description
if there is no object to obstruct the airflow around the intake or exhaust vent. It
might be airfilter clogged. Clean up the airfilter.
* The temperature unit can be set either Centigrade or Fahrenheit in item "Initial
Setting". (☞p.28)
Confirmation window
appears when the
Standby
button is pressed.
Popup confirmation window