There are eleven (11) tabs for configuring microKEYER II. Each tab controls part of microKEYER II's
functions. Except for CW Messages and FSK Messages, any change is applied immediately.
Ports: assign virtual ports to the microKEYER II for use by applications
●
Audio Switching: configures microphone audio routing based on operator preference,
●
application sound card handling and operating mode
Audio Mixer: sets microHAM CODEC levels.
●
NOTE: The Audio Mixer is not available under Windows Vista or 7. Those operating systems do not
allow an application like Router overall control of the sound device.
PTT: configures T/R keying, keying sequencer and foot switch functions
●
CW/WinKey: configures the internal CW keyer
●
CW Messages: enter/store internal CW message memories
●
FSK Messages: enter/store internal FSK message memories
●
DVK: configure and control the level of Router's voice keyer
●
Keyboard: configure operation of PS/2 keyboard or keypad
●
Display: configures operation of the LCD display.
●
System Settings: configures power control and operation of the auxiliary CI-V/serial ports
●
microHAM © 2010 All rights reserved
DEVICE CONFIGURATION TABS
19