Table of Contents
Advertisement
K
CM35
Provide release of ISDN trunk when receiving
the ISDN DISCONNECT message with
Progress Description=8 from ISDN because
the called party is busy in tandem connection
(ISDN to ISDN).
NOTE:
To release the ISDN trunk when receiv-
ing the ISDN DISCONNECT message,
set the second data 0 to the incoming
trunk route of tandem office.
Provide relay of the ALERT message to the
calling party in tandem connection (ISDN to
ISDN).
NOTE:
This command should be set to both
incoming trunk route and outgoing
trunk route of tandem office.
END
• Specify whether the Calling Party Number (CPN) sent from ISDN is sent to the CCIS network.
START
CM08
Maximum number of digits sent to CCIS net-
work.
CMA7
Activate IAI2 message for sending ISDN CPN
to CCIS network.
Allow sending of CPN to CCIS network.
END
DESCRIPTION
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
•
Y=233
(1)
00-63: B channel Trunk Route No.
(2)
0: To provide
•
Y=266
(1)
00-63: B channel Trunk Route No.
(2)
0: To provide
(1)
379
(2)
0: 24 digits
•
Y=26
(1)
0-7: CCIS Channel No.
(2)
0: Active
•
Y=28
(1)
0-7: CCIS Channel No.
(2)
0: Allowed
– 113 –
ISDN-BRI PROGRAMMING
DATA
DATA
NWA-008852-001 Rev.5.0
98ch3001.fm
NOVEMBER/15/2006
Advertisement
Table of Contents
