Table of Contents
Advertisement
ISDN-BRI PROGRAMMING
BRT Assignment
START
CM05
Assign an AP number to the BRT card.
The AP number must match the SENSE switch
setting on the BRT card.
NOTE:
Specify the AP highway channel for PN-
4BRTA-A card.
Assign an Remote Site number that accommo-
dates AP cards to the AP number assigned by
CM05 Y=0.
Assign the accommodation type of the Remote
Site to the AP number assigned by CM05 Y=0.
NOTE:
A
DESCRIPTION
The AP number 20-31 cannot be set
to the PN-BRTA card.
Only when accommodating the BRT
card in Remote Site, set the second
data to 1 (remote site) to the AP
number assigned by CM05 Y=0.
CHAPTER 3 SYSTEM DATA PROGRAMMING
•
Y=0
(1)
04-15, 20-31: AP No.
(2)
10: BRT card
INITIAL
•
Y=1
(1)
04-15, 20-31: AP No.
(2)
0 : Use Expanded Highway channel
INITIAL
1 : Use Basic Highway channel
•
Y=8
(1)
04-15, 20-31: AP No.
(2)
XX 99
XX: 01-15: Remote Site No. 01-15
INITIAL
•
Y=6
(1)
04-15, 20-31: AP No.
(2)
1 : Remote Site
INITIAL
3 : AP card
– 104 –
ISDN-BRI PROGRAMMING
DATA
(128 time slots)
(128 time slots)
[Series 3200 R6.2 software or
Series 3300 software required]
01-30: Remote Site No. 01-30
[Series 3400 software required]
NONE : No data
NWA-008852-001 Rev.5.0
NOVEMBER/15/2006
98ch3001.fm
Advertisement
Table of Contents
