Trunk Number Assignment
When assigning the trunk number with commands as shown in the following table, the range of the trunk
number that can be assigned is valid by the software version you use.
COMMAND CODE
First data of CM30
Second data of CM07/CMA9
NOTE:
Assign the trunk number 256-511 only when accommodating the PRT card in Remote Site.
AP Number Assignment
When using Series 3800 software or later in the system, AP numbers 64-93 (for the expanded PRT card)
can be assigned by the following commands. However, AP numbers 64-93 are available only when accom-
modating the PRT card in Remote Site.
• Second data of CM06
• First data of CMAA
CHAPTER 3 SYSTEM DATA PROGRAMMING
AVAILABLE RANGE OF TRUNK NUMBER
Series 3700 R12.2 or
before
000-255
– 88 –
PRECAUTIONS
Series 3800 or later
000-511
NOTE
NWA-008852-001 Rev.5.0
98ch3001.fm
NOVEMBER/15/2006