Individual Test [Menu], [9], [2] - Toshiba DP120F Service Manual

1.2 INDIVIDUAL TEST
In INDIVIDUAL TEST mode, the user himself follows the procedure to test this machine in
interactive mode.
Use the [ ↑ ] or [ ↓ ] key to select "2. INDIVIDUAL TEST", and then press the [ENTER]
(1)
key.
Use [ ↑ ] or [ ↓ ] keys to select the desired item, and then press the [ENTER] key.
(2)
There are the following individual tests. For details, refer to the description of each test
item listed below.
01.ADF TEST
02.KEY TEST
03.LED TEST
04.LCD TEST
1.2.1 ADF TEST
The test checks the operation of the ADF by transporting and unloading documents. You can
check that the ADF is normal if the number of documents loaded is consistent with the number
of documents transported and unloaded.
Use the [ ↑ ] or [ ↓ ] key to select "01. ADF TEST", and then press the [ENTER] key.
(1)
ADF TEST
LOAD DOCUMENT
<Remarks>
DP120F/DP125F Troubleshooting
↓
You can change the transport speed by pressing the [MODE] key.
STD:
FINE (Same when HALF TONE is set):
U-FINE (Same when HALF TONE is set): Slow
[MENU], [9], [2]
04.LCD TEST
05.SPEAKER TEST
06.SWITCH TEST
07.TEST PRINT
[MENU], [9], [2], [01]
Fast
Medium
11-4 March 2000 © TOSHIBA TEC