2.1.4 Slide Cover
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the two screws from the slide cover.
(2)
Detach the slide cover by sliding it in the direction of the arrow.
Hook
(3)
Reassemble the components in the reverse order of disassembly.
NOTE: When installing the slide cover, align the three hooks of the slide cover with
the holes of the rear cover.
DP120F/DP125F Removal/Replacement
Fig. 8-2-7
8-6
Slide cover
08-02-07
March 2000 © TOSHIBA TEC