(5)
Remove the connector from the relay connector on the bottom frame.
(6)
Remove the two screws from the fuser, and remove the fuser.
(7)
Remove the plate from the fuser.
Connector
Relay
connector
(8)
Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, set the fuser rank referring to the "3.2 Fuser Tempera-
ture Settings" on page 8-133.
DP120F/DP125F Removal/Replacement
Fig. 8-2-74
8-58
Plate
Fuser
08-02-74
March 2000 © TOSHIBA TEC