Toshiba DP120F Service Manual page 496

2.4.13 Friction Plate
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the rear cover. (Refer to "2.1.5 Rear Cover.")
(2) Remove the front cover assembly. (Refer to "2.1.6 Front Cover.")
(3) Remove the right side cover. (Refer to "2.1.7 Right Side Cover.")
(4) Remove the inner cover. (Refer to "2.1.13 Inner Cover.")
(5) Remove the paper pickup solenoid. (Refer to "2.4.7 Paper Pickup Solenoid (Bypass Tray).")
(6) Remove the printer frame right assembly. (Refer to "2.4.8 Printer Frame Right Assembly.")
(7) Remove the paper pickup roller assembly. (Refer to "2.4.9 Paper Pickup Roller Assembly
(Bypass Tray).")
(8) Rotate the friction plate until bosses on the sides of the friction plate can be released from
the guide, and lift the friction plate to remove.
(9) Reassemble the components in the reverse order of disassembly.
DP120F/DP125F Removal/Replacement
Fig. 8-2-95
8-76
Friction plate
08-02-95
March 2000 © TOSHIBA TEC