Toshiba DP120F Service Manual page 474

(5) Disconnect the connectors from CN1 and CN2 on the HVPS.
(6) Disconnect the five spade connectors from the terminal on the high voltage contacts.
CN2
CN1
HVPS
(7) Disconnect the ground wire from the terminal on the HVPS.
(8) Remove the four screws from the HVPS, and remove the HVPS.
(9) Reassemble the components in the reverse order of disassembly.
NOTES: • When installing the HVPS, make sure that the five spade connectors on the
HVPS contact the spring terminals of the high voltage contacts properly.
Be careful not to catch dust between the spade connectors on the HVPS
and spring terminals of the high voltage contacts.
• After reassembling, perform the print test referring to the "Chapter 11: 1.5.2
PRINT TEST" on page 11-18.
DP120F/DP125F Removal/Replacement
Red
Fig. 8-2-68
Fig. 8-2-69
8-54
White
Red
White
Black
Ground wire
HVPS
March 2000 © TOSHIBA TEC
08-02-68
08-02-69