Status Icons & Led Indicators; Keypad Tones - Bosch Solution 64 Installer's Manual

Keypad DIP Switch Address Settings
Keypad To Address
Keypad 1
Keypad 2
Keypad 3
Keypad 4
Keypad 5
Keypad 6
Keypad 7
Keypad 8
Table 4: Keypad DIP Switch Address Settings
S tatus I c on s & L ED I n d ic at o rs
The following table lists the function of each of the ICON
Symbols and LED Indicators on the Graphic Keypad Display.
Icon Status
The keypad can display the current status of up to
8 areas simultaneously via the Area Icon Indicators.
This option can be disabled in MENU 6-1-4
On
The area is turned All On or Part On
Off The area is turned Off
Flashing
The area has an alarm
Fast
On System power is normal
Flashing
System power is missing
Flashing A fire alarm is active
Off No fire alarm
Fire alarm in memory (Turn the area
On
All On and Off to Clear).
The existing service or trouble
On
condition has been acknowledged.
Off No service or trouble conditions exist
A service / trouble condition is present
Flashing
that has not been acknowledged.
On The area is turned Part On.
Off The area is not turned Part On.
On
The area is turned off.
Off The area is turned All On or Part On
On The area is turned All On
Off
The area is turned Off
On You have mail waiting to be read
Off No Mail
Area is ready to turn on
On
(All On / Part On)
Off Not ready, Zone Open
Bosch Security Systems | 11/05 | BLCC110I
S1 S2
Off Off Off
On Off Off
Off On Off
On On Off
Off Off On
On Off On
Off On On
On On On
Meaning
Solution 64 | Installer Guide | Section 2 - Installing the Hardware
On
Red
S3
LED
Flashing
On
Green
LED
Flashing
Red &
Green
Flashing
LED
Table 5: ICON & LED Indicator Meanings
K eyp ad Ton es
Your keypad emits several distinct tones and displays text to
alert you to system events. The volume of the keypad tones
can be adjusted in MENU 6-1-0.
Type
Fire When a fire zone sounds an alarm, the keypad
Alarm
will sound 3 seconds on and 2 seconds off
Tone (repeat).
When a burglary zone activates while your
Burglary
system is turned on, your keypad emits a
Alarm
continuous siren tone. It sounds for the time
Tone
set by your security company.
When a system component is not functioning
Trouble
properly, your keypad sounds 4 fast short
Tone
beeps followed by a 5 second pause (repeat).
Pressing any key on the keypad sounds one
Key Press
short beep, indicating that the key press is
Tone
accepted.
When you enter the premises through a zone
programmed for entry delay, the keypad
Entry
sound a Hi/Low tone to remind you to turn off
Delay the area. If the area is not turned off before
Tone
the entry delay expires, an alarm condition
will sound and a report may be sent to your
alarm company.
After you turn an area All On, the keypad will
sound 1 short beep every second. During the
Exit
last 10 seconds fast short beeps will be heard.
Delay
If you don't exit before the delay time expires
Tone
and an exit delay door is faulted, an alarm
occurs.
Error If you press an incorrect key, your keypad will
Tone sound a 2 second tone.
The keypad will sound a Hi / Lo tone to
Menu
indicate you have entered MENU Mode and a
Mode Lo/Hi tone to indicate you have exited MENU
mode.
The keypad sounds fast short beeps to alert
Chime
you when a zone programmed for chime is
Tone
faulted or unsealled.
All On
Alarm
Area is off.
Area not ready to turn on
Installer programming mode is active.
Meaning
Table 6: Keypad Tone Meanings
2-3