Overview; Features; History Log - Bosch Solution 64 Installer's Manual


Fe a t ure s
Listed below are the main features of the Solution 64 Control
Panel.

Individual Box Tamper Circuit Monitoring
 Voice Module With Multi-event Messages (Optional)
 Report Via Email (Internet)

Telephone Line Busy Tone Detect
 RAS Intelli-connect® CLI Caller Line Identification

Daylight Savings Auto Time Adjust
 Senior Watch

System Maintenance Interval Reminder
 System Weekly Test Reminder

Area Inactivity Interval
 Temporary Pin Code
 Dual Reporting
 Alarm Report Abort/cancel Options
 8 Programmable Holiday Calendars

8 Programmable Schedules
 16 On-board Zones (Exp To 64 Wired or Wireless)

Fire Alarm Verification
 48 Pin Codes

3 Supervised High Power Digital Outputs
 1 Relay 2 Amp Form (C) Contact (Expandable to 13)

Supervised Siren Driver
 Partitionable To 8 Areas
 Dialler Reports SIA, Contact ID, SMS and Email Formats

Supervised LAN Keypads (Maximum 8 Keypads)
 Keyswitch Input

256 History Event Memory
 Fully Menu Text Programmable

Programmable Via Solutionlink Software(Remote/Direct)
 Telephone Line Fail Monitor

Time Executed Functions
 60 Output Event Types

Exit Restart
 Expansion Module SuperSolution
 DTMF Tone Decoder Built In

Remote and Auto Arming
Bosch Security Systems | 11/05 | BLCC110I
Ove rv iew
Zones
The Solution 64 control panel provides up to 64 separate zones
of protection. Zone programming determines the panel's
response to open/short and tamper conditions on the zone
loop.
Areas
The control panel supports up to 8 separate areas. You can
assign all zones to a single area, or you can assign each zone to
a combination of different areas.
You can arm and disarm the control panel by area,
alternatively, you can arm and disarm several areas at the same
time.
Dialler
The control panel has a built-in dialler to send reports to the
receiving party (ie. Security company monitoring station,
mobile phone etc).
Keypads
You can connect a maximum of 8 fully supervised keypads
to the control panel. The available current affects the total
number of keypads that you can connect without the need to
provide additional power supplies.

History Log

The control panel can store up to 256 history events from
all 8 areas. All events are stored in the log, even if they are
programmed not to report via the on-board dialler.
You can view the control panel's history log via keypad, serial
printer (optional), or by connection of a personal computer
(direct/remote) using the SolutionLink upload/download
software.
Programming
You can program the Solution 64 either by a keypad or using a
personal computer using the SolutionLink upload/download
software.
S e c t ion 1

Overview

1-1