Table of Contents
Advertisement
Section 10
Appendix 2 IEC 60870-5-104 interoperability
90
Counter read
Counter freeze without reset
Counter freeze with reset
Counter reset
General request
Request counter group 1
Request counter group
Request counter group 3
Request counter group 4
Parameter loading
(Object-specific parameter, mark with an "X" if the function is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in both
directions.)
Threshold value
Smoothing factor
Low limit for transmission of measured values
High limit for transmission of measured values
Parameter activation
(Object-specific parameter, mark with an "X" if the function is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in both
directions.)
Act/deact of persistent cyclic or periodic transmission of the
addressed object
Test procedure
(Station-specific parameter, mark with an "X" if the function is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in both
directions.)
Test procedure
1MRS757105 B
RER601/603
Technical Manual
Advertisement
Table of Contents
