Table of Contents
Advertisement
Section 5
RER601/603 Configurator
5.9.8
58
Table 41:
Maximum collected bytes
Description
Type
Units
Value range
Note
Max time defines the maximum time collected for the packet collector in 0.1
second increments. If there has been data in the packet collector for longer than the
value defined by this parameter, the data is sent to the network.
Table 42:
Maximum collected time
Description
Type
Units
Value range
Note
Max packets defines the maximum amount of IEC 60870-5-101 packets stored into
the packet collector before sending the data to the network.
Table 43:
Maximum collected packets
Description
Type
Units
Value range
Note
Other settings
Write syslog defines if error messages are stored to the system log file.
Table 44:
Write system log
Description
Type
Units
Value range
Note
Value
Packet size
Bytes
1...1500
The value should be smaller than the MTU/MRU
of the network used
Value
Timeout
0.1 seconds
1...255
The value must be smaller than t1
Value
Packet count
Packets
1...255
-
Value
Boolean
N/A
No, Yes
The system log is available by using the WHMI
1MRS757105 B
RER601/603
Technical Manual
Advertisement
Table of Contents
