Gprs - ABB RER601 Technical Manual

Wireless gateway
Hide thumbs Also See for RER601:
Table of Contents

Advertisement

Section 3
Physical connections
3.2
16

GPRS

The device with GPRS includes an FME male type connector for an external
antenna. Any kind of external 50 Ω dual-band antenna can be used intended for
GSM900 (880–960 MHz) and GSM1800, also known as PCN, (1710–1880 MHz)
frequency bands. The antenna is connected directly to the connector located on the
device's back panel.
Commercially available antennas are usually provided with a flexible 50 Ω cable
with a length of 2–3 meters and a female type FME connector.
The device's IEC 60870-5-104 gateway is tested with antennas from Hirschmann
Rheinmetall Elektronik GmbH. Examples of tested external antennas include the
sticker type and magnetic mount antennas.
GUID-12B0663A-5DB4-4A30-BC92-D3A7937C2A03 V1 EN
Figure 10:
Sticker type patch antenna (MCA 18 90 STRIPE)
GUID-0EBA8EC3-4484-4EF5-B82E-205510850BA7 V1 EN
Figure 11:
Magnetic mount antenna (MCA 18 90 MH)
Both antennas have an FME connector (female) and a 250 cm RG174 cable.
A SIM card with enabled data transfer is required for using the wireless
connection. Standard 3 V SIM cards may be used with the IEC 60870-5-104
1MRS757105 B
RER601/603
Technical Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rer603

Table of Contents