Fsk Messages Tab - microHAM microKEYER II User Manual

Microham microkeyer ii radio interface user's manual
Hide thumbs Also See for microKEYER II:
Table of Contents

Advertisement

On this tab you can define nine FSK messages of up to 50 characters each which are stored in EEPROM.
Each memory may have a programmable repeat delay and/or call another memory.
Commands which may be included in a memory are:
CR & LF:
Figure:
Letter:
Blank:
Letter:
Jump to:
Delay:
Store:
Store All:
Load from File: loads all messages from file
Save to File:
Messages can also be saved and replayed using an external keyboard attached to the PS/2 jack.
See: External Keyboard.
NOTE: Messages are not saved or loaded with Presets
microHAM © 2008 All rights reserved

FSK MESSAGES TAB

Insert Carriage Return/Line Feed
Insert special Figure character
Insert special Letter character
Insert special Blank character
Insert special Bell character
used for looping a message or calling another message
sets the delay in seconds before looping or calling another message
saves one message to microKEYER II memory
saves all messages to microKEYER II memory
saves all messages to file
35

Advertisement

Table of Contents
loading

Table of Contents