3.1.2
Connection to the connector
Connect the CC-Link dedicated cable to the CC-Link communication connector.
NOTE
• When wiring cables to the inverter's RS-485 terminals while a plug-in option is mounted, take caution not to let the
cables touch the circuit board of the option or of the inverter. Otherwise, electromagnetic noises may cause
malfunctions.
Caution
Take caution not to subject the cables to stress.
After wiring, wire offcuts must not be left in the inverter. Wire offcuts can cause an alarm, failure or malfunction.
CC-Link
dedicated cable
CC-Link
communication
connector
WIRING
3
19