Concluding Steps - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Figure 47: Installing the power supply module
Ê Carefully push the power supply module into the empty bay (1) until it stops.
Ê Push the handle of the power supply module as far as it will go in the
direction of the arrow (2).
I
Make sure that the power supply module engages correctly in the bay
and is locked in position. This is the only way to prevent the power supply
unit from sliding out of its bay and being damaged during transportation.
6.2.4

Concluding steps

Perform the following procedures:
"Connecting the power cord" on page
Ê
CX400 S1
Upgrade and Maintenance Manual
73.
Power supply
83