Mounting The Server Enclosure In The Rack; Seating The Server On The Rack Rails - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Figure 35: Installing the server node
Ê Push the server node at the handle into the server enclosure until the locking
mechanism snaps into place.
Ê If applicable, connect all external cables to the server node.
4.12

Mounting the server enclosure in the rack

4.12.1 Seating the server on the rack rails

V
CAUTION!
At least two people are needed to position the server on the rack rails.
(For the Japanese market, please refer to " 安全上のご注意 ".)
CX400 S1
Upgrade and Maintenance Manual
Basic hardware procedures
67