Installing The Linking Board - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Linking boards
Figure 116: Removing the linking board
Ê Slide the linking board in the direction of the arrow as far as it will go (1).
The linking board will be disconnected from the HDD backplane (2).
Ê Lift the linking board out of the chassis (3).

10.1.2.4 Installing the linking board

Ê Select the corresponding linking board, see
Figure 117: Board number and mounting direction of the linking board
Ê Note the board number (1) and the mounting direction (2) of the linking
board.
162 Upgrade and Maintenance Manual
figure 115 on page 160.
CX400 S1