Installing A 2.5-Inch Hdd/Ssd Tray - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.2.3.4

Installing a 2.5-inch HDD/SSD tray

V
CAUTION!
If the removed HDD/SSD module is not replaced immediately, always
replace the HDD/SSD tray into the unused HDD/SSD bay to comply with
applicable EMC regulations and satisfy cooling requirements.
Figure 68: Installing a 2.5-inch HDD/SSD tray
Ê Insert the HDD/SSD tray into the drive bay and carefully push back as far as
it will go (1).
Ê Close the release lever in the direction of the arrow (2).
108 Upgrade and Maintenance Manual
CX400 S1