Power Distribution Units (For Regions Other Than Emea&I); Power Distribution Units (1U); Power Distribution Units (2U); Figure 1.11 Power Distribution Unit For Dx100 S3/Dx200 S3 (Ac200-240V, 1U 4Outlets) - Fujitsu ETERNUS DX200 S3 Configuration Manual

Chapter 1 Component Names
1.3 Power Distribution Units (for Regions Other than EMEA&I)
9. Fan expander module (FEM#0)
10. Fan expander module (FEM#1)
1.3 Power Distribution Units (for Regions Other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
1.3.1.1 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 1U 4Outlets)

Figure 1.11 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 1U 4Outlets)

1. Main line switch
2. Outlet (OUTPUT)
3. Inlet (INPUT)
1.3.2

Power Distribution Units (2U)

2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
1.3.2.1 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 12Outlets)
There are 12 outlets.

Figure 1.12 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 12Outlets)

1. Main line switch
2. Outlet (OUTPUT)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
1
2
3
1
2
24
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0