Fujitsu ETERNUS DX200 S3 Configuration Manual page 164

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
6
Select the radio button of the volume that is to be used, and then click the [OK] button.
Select the "No.: 1, Name: sdv0" volume.
7
Check the displayed information, and then click the [Start] button.
8
In the confirmation screen, click the [OK] button.
The SnapOPC+ session starts.
9
Click the [Done] button to return to the [Advanced Copy] screen.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
164
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0