Fujitsu ETERNUS DX200 S3 Configuration Manual page 142

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
17
On the [iSCSI Initiator Properties] screen, confirm that [Status] has changed to [Connected].
18
In the same way, repeat
Initiator IP: IP address of the server (B in
Target portal IP: IP address of the ETERNUS DX Disk storage system (D in
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Step 11 and later steps for the other target.
Figure 8.1)
142
Copyright 2014 FUJITSU LIMITED
Figure 8.1)
P3AM-7652-02ENZ0