Table of Contents
Advertisement
setup screen
Port
1.
From the Setup menu, select the
<Network (
2.
Click <Port>.
3.
Type in each item in the Port menu as
necessary.
Neither the port range between 0 and 1023
nor port 3702 is available.
HTTP port : HTTP port used to
access the network encoder via the
web browser.
The default is 80(TCP).
VNP port : Set a port used to transfer video signals with the Samsung protocols.
RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.
The port range of the Viewer is between 4502 and 4532. If the VNP port is with this effective
range, the Viewer port should be specifi ed the same as the VNP port.
Silverlight policy port : Silverlight is used to permit to acquire a network connection;
the default is 943.
You cannot change the Viewer/Silverlight policy server port of a camera.
4.
When done, click [Apply (
DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of
a network encoder into a general Host Name so that the user can easily remember it.
1.
From the Setup menu, select the
<Network (
2.
Click <DDNS>.
3.
Select <DDNS>.
4.
Type in the DDNS items according to
the selected type.
Samsung DDNS : Select this if you
use the DDNS server provided by
Samsung Techwin.
48_ setup screen
)> tab.
)].
)> tab.
Advertisement
Table of Contents
